Check the headlight aiming. 1. Prepare a thick white paper. 2. Stand the paper perpendicular to the ground at the position 3 m (9.84 ft) away from the headlights bulb center. 3. Ensure that the center line of the vehicle and the paper face forms a 90-degree angle as shown in the illustration. 4.
If its dark it will be easier to adjust. Step Two: Pop the hood. Step Three: Locate set screw behind headlamp housing. Step Four: Turn Clockwise to Lower, Counter-Clockwise to Raise the beam. I didn't have any Torx drivers around so I used a 2.5 Allen Key and it did the trick fine.
Posts: 1,837. Likes: 1. Received 3 Likes on 3 Posts. Measure to the center of the the headlight and then make a tape line on a flat wall like a garage door park the truck 25' away on level ground and adjust so the lights so on low beam it is basically all below the line. Obviously you won't have a razor sharp cutoff with reflector headlights

Illustration showing proper distance and angle when adjusting headlight alignment | Image Source: Richard McCuistian. The surface in front of this wall also needs to be flat so that you can properly gauge your headlight’s alignment. You should remove any cargo inside your vehicle.

Hi, I’m Gerald. This is my channel about vehicle repairs and reviews that you can use to grow your business and or save YOU money. If you’re someone who want . 177 455 224 179 411 146 71 353

how to properly adjust headlights